XD-F Lightweight Precast Concrete Wall Panel System / Wall Panel Production Line
Chuangxin Precast Concrete Wall Panel Making Machine / Lightweight Wall Panel production line equipment
wall panel machine feature:
This machine adopts the technology of double-drive double-roller-extruding, and
the product is formed once after sizing, material feeding, spreadingno-woven
cloth, compounding and repressing. The equipment runs stably with high
automatic degree, and the specification of its product can be adjusted arbitrarily.
Product feature and perfprmance
| 1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 | | 2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% | | 3 | Anti-breaking load | ≥1400N | 5640N | | 4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts | | 5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w | | 6 | Thermal bridges area ratio | ≤8% | 2.22% | | 7 | Sound insulation Index | | 36dB | | 8 | Radioactivity | | None | |
wall panel making machine production line
| No. | Name | Function | Size (mm) | Power(KW) | Quantity(set) | | 1 | Slurry mixer | Mixing cement mortar of up and own materials | 2300×820×820 | 3 | 2 | | 2 | Main mixer | Mixing middle materials | 2800×1500×1300 | 18.5 | 2 | | 3 | Crusher | Crush and collection material after cutting | 1960×880×1070 | 11 | 1 | | 4 | Duplex units feed in mould board | Automatic feed-in mould board on the main formed units, no need by manual, can reduce labor, improve work speed. | 4800×3100×2800 | 1.5 | 1 | | 5 | Main formed units | It includes all of device of automatic feed-in cement mortar, fiber cloth, spreading, one-time forming and etc. | 29000×1800×1500 | 11.5 | 1 | | 6 | oil brusher | It can adhibit the PVC paper on the mould board by automatic. (Or brush the oil on the mould board) | 2700×1600×800 | 1.1 | 1 | | 7 | Automatic tracking cutting device | It can cut the product on production line when it’s wet, and it will not hurt the product and mould board, reduce the labor, low labor intensity . | 4500×2000×1450 | 2.45 | 1 | | 8 | Hydraulic lifter of receiving board system | It can load the formed board on the form rack, reduce labor, reduce hurting the board when by manual, and improve automatic. | 2700×3800×1700 | 9.6 | 1 | | 9 | PLC Control system | Control the production line automatic. | 750×500×1800 | | 1 | | |
