Shandong Chuangxin Building Materials Complete Equipments Co., Ltd
Shandong Chuangxin Building Materials Complete Equipments Co., Ltd
Add to Cart
Sound Insulation Fireproof Magnesium Oxide Wall Panel Making Machine High Performance
XD full automatic wall panel making production line for 2000 SQM
|
| Item | National Standards | Testing Indexes |
| 90mm | 90mm | ||
| 1 | Anti-impact Capacity | ≥5 | ≥10 |
| 2 | Anti-bending damage load | ≥1.5 | ≥4 |
| 3 | Compressive strength/Mpa | ≥3.5 | ≥5 |
| 4 | Softening coefficient | ≥0.80 | ≥1 |
| 5 | Facial surface density g/cubic meters | ≤90 | ≤70 |
| 6 | Water absorption | ≤10 | ≤9 |
| 7 | Drying shrinkage% | ≤0.6 | ≤0.5 |
| 8 | Hanging force/N | ≥1000 | ≥1500 |
| 9 | Sound insulation/dB | ≥35 | ≥50 |
| 10 | Fireproof limit/h | ≥1 | ≥3 |
| 11 | Heat transfer coefficient w/m2 | ≤1.0 | ≤1.0 |
| 12 | Radioactivity limit | ≤1.0 | ≤1.0 |
| 13 | IRa(interior radiation indexes) | ≤1.0 | ≤1.0 |
| 14 | lr(exterior radiation indexes) | ≤1.0 | ≤1.0 |
| 1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
| 2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
| 3 | Anti-breaking load | ≥1400N | 5640N |
| 4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts |
| 5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
| 6 | Thermal bridges area ratio | ≤8% | 2.22% |
| 7 | Sound insulation Index |
| 36dB |
| 8 | Radioactivity |
| None |
III Feature
1. Anti-earthquake with light weight: In view of its weight per unit area is only
1/10 of red brick wall, the product has good anti-earthquake performance. It can
be used at low-rise building and high-rise building, and it is preferred to be used
at workshop with steel frame structure. It can replace the color steel plate with its
better performance.
2. Fast and convenient operation: It can be installed by board or combination with
the dry method, and the product can be nailed, cut, planed, drilled and stuck.
3. Low comprehensive cost: The product is made of agricultural and industrial
wastes, so the production cost is low. With the low load of girder and short
construction period, it can reduce over 20% of engineering cost after compared
with solid brick and hollow brick.
4. Energy-saving and environmental protection: The production processing need no high
temperature and high pressure. Being a green environmental-protection energy-saving building materials, the product has no toxicity, harm, pollution and
radioactivity.
5. Increasing the usage area: Under the same condition of heat-preserving and
sound insulation, with the thinner plate, the product can increase over 10% usage
area after compared with the same building.
6. Having the following features: fireproofing, water-proof, anti-impact, acid & alkali resistant and anti-aging.
